MONOLITHIC GLASS

Made-to-measure tempered and shaped clear glass

TEMPERED GLASS

Reinforced glass by heat treatment

Tempered glass is glass transformed by heat treatment with a tempering process which hardens the material. Also known as “heat-tempering”, this process increases the temperature of the glass to a temperature between 570°C and 700°C depending on its composition, i.e. close to the softening point, and then to cool it quickly. This treatment hardens the material (hardened glass), which means that tempered glass is at least 4 times more resistant to impacts than conventional monolithic glass.

 

Verre-clair-vs-verre-trempe

*Left: Clear laminated glass, may crack under pressure or impact, but maintains integrity with interlayer.
*Right: Tempered glass that completely shatters into small, blunt pieces.

*Photo: Euroverre factory, tempering department

TEMPERED GLASS

ACCORDING TO STANDARDS

Euroverre tempered glass is certified in accordance with North American standards:

  • CAN/CGSB 12.1 – 2017
  • ANSI Z97.1 – 2015
  • CPSC 16 CFR 1201 II (Categories I & II)

These certifications apply to Euroverre tempered glass having
the following thicknesses: 5 mm / 6 mm / 8 mm / 10 mm / 12 mm

MECHANICAL

RESISTANCE

Euroverre tempered glass has a very high level of bending and impact resistance that is 5 times greater than that of conventional annealed glass.

 

THERMAL

RESISTANCE

Euroverre tempered glass offers much greater resistance to thermal breakage than conventional annealed glass of the same thickness.

 

AVAILABLE PRODUCTS

CLEAR AND EXTRA-CLEAR GLASS

EUROVERRE certifies that its glass is of North American and/or European origin only to guarantee consistency in the quality of its products. Your projects for office partitions, balustrades, fences, or others, will certainly be successful.

Available thicknesses: 5mm, 6mm, 8mm, 10mm & 12mm
(clear and extra-clear glass)

Sizes available: 96" x 130" / 108" x 144"
(availability according to thicknesses, special orders possible)

SHAPING & CUTTING

SERVICES

Euroverre has a factory of 40,000 square feet, almost completely automated with high-end German and Italian machinery allowing it to offer precise cutting and shaping to its customers.

 

SERVICES

MINIMUM

MAXIMUM

Cutting

4" x 4"

108" x 130"

Straight polishing

4" x 4"

72" x 120"

Bi-lateral polishing

11" x 11"

78 3/8" x 120"

Notches

1/2" x 1/2"

7 1/2" x 38"

Hole diameter

6mm or glass thickness

190 mm

Inner radius

8 mm or glass thickness

190 mm

Hardening

4" x 11" or 7" x 10"

78 3/8" x 120"

OUR ONLINE TOOLS

Ordering has never been easier!

Submit an online quote request for one or more of our products. One of our specialists will contact you shortly to review the order with you.

Euroverre customers are pampered and have a powerful tool at their disposal to submit their orders via a dedicated portal adapted to their needs. Another "Euroglass Advantage"!

Submit an online quote request for one or more of our products. One of our specialists will contact you shortly to review the order with you.

NEED ADVICE?

Contact our specialists

Logo-Euroverre-White-2

For more than 30 years, we have contributed to the development of glass products across Canada, thanks to our knowledge of glass and our desire to push the limits of innovation.

Contact Us

General Inquiries
info@euroverre.com

Phone
1-450-668-0804

Offices and Factory
1610 Rue Nationale, Terrebonne, QC, J6W 0E2