Fire-Rated
Stops flames, smoke and hot, toxic gases
Protects against smoke and flames, but not against radiant heat.
- Allows safe escape where fire resistance is generally required
- Must not exceed 25% of the area of a party wall and must comply with IBC and NFPA 80 requirements
- Rated for 20 - 180 minutes (doors) and 20 - 90 minutes (windows)
- It is not required to install this glass in a fire rated frame
- For UL 10C / UL 10B / NFPA 252 doors and UL 9 / NFPA 257 windows
- Meets "Hose Stream" test standards
Suggested products :
Thermal Barrier
Compartmentalizes fire and blocks heat transfer
Protection against smoke, flames and radiant heat.
- Allows safe evacuation, without the risk of burns that can be caused by a radiant heat source
- Intumescent glass fire resistant for 60 to 120 minutes
- Must be installed in a TGP frame to qualify for ASTM E119
- Meets the same requirements as a gypsum or CMU type wall, even going from floor to ceiling
- Meets "Hose Stream" test standards
Suggested products :
« Hose Stream » Test
Exposed to 30 psi water jet following fire tests
Immediately following the "Fire Test", the tested assembly must experience and endure the pressure caused by a high intensity water jet.
The jet is propelled a distance of 20 ft with a pressure of 30 psi.
Impact Resistant
CAN/CGSB-12.1-M90 certified to reduce the risk of injury in the event of an impact
This standard applies to processed glass which has been tempered, laminated, or otherwise processed to reduce the risk of injury on impact.
- Certified CAN/CGSB-12.1-M90 (Cat I et Cat II)
- CPSC 16CFR 1201-CAT II
- CAN/ONGC 12.1-M
Positive Pressure Tested
Meets UL 10C standards
As heat develops within the source area, pressure within the enclosed room begins to build relative to the pressure outside.
Once the fire reaches equilibrium in the positive pressure zone, smoke, hot gases and flames are forced through any openings in the door or window assembly.
Testing to the UL 10C standard more closely simulates real fire conditions.
Classified and Labeled by UL
Meets UL standards
Classified and labeled by Underwriters Laboratories, Inc.® (UL), an independent product safety certification organization.
Euroverre, over 40 years of expertise
From a passion for glass to Québec excellence.
For over 40 years, Euroverre has supported building professionals across the commercial, institutional, and residential sectors by providing glass solutions that combine quality, reliability, and innovation.
Become part of this story of excellence and explore the career opportunities within our team.
